Hibbeler Statics 14th Edition Problem 7-13 Solution: Internal Forces at D and E of a Compound Beam

Internal Forces in Beams

Normal Force, Shear & Moment at D and E — Compound Beam with a Pin at B

A compound beam is made of two members joined by a pin at B. Member AB is 12 ft long and rests on a roller at A, where a 6 kip·ft counterclockwise couple is applied; it carries a 5 kip downward load at its mid-point. Member BC is 8 ft long, is fixed to a wall at C and carries a uniform load of 1.5 kip/ft. Point D is just to the left of the 5 kip load and point E is the mid-point of BC. Find the internal normal force, shear force and moment at D and at E.

What We Know

  • AB = 12 ft: roller at A, pin at B, 6 kip·ft counterclockwise couple at A, 5 kip load 6 ft from A
  • BC = 8 ft: fixed at C, uniform load 1.5 kip/ft
  • D: just left of the 5 kip load (6 ft from A); E: 4 ft to the right of B
  • Find: N, V and M at D and at E
Method of sections: A pin transmits force but no moment, so member AB can be solved on its own. The pin force is then applied, reversed, to member BC. No horizontal load acts, so both normal forces are zero.
Part A — Member AB
Step 1Roller Reaction and Pin Force
1.5 kip/ft5 kipAyCy6 kip·ftADBEC6 ft6 ft4 ft4 ft

The wall at C also supplies a moment, which is not needed here. For member AB alone, take moments about the pin B, counterclockwise positive:

\[ \sum M_B = 0: \quad 5(6) + 6 - A_y(12) = 0 \]
\[ A_y = 3.00 \ \text{kip} \ (\uparrow) \]
\[ \sum F_y = 0: \quad B_y = 5 - 3 = 2.00 \ \text{kip} \ (\uparrow \text{ on AB}) \]
Part B — Internal Forces at D
Step 2Left Segment AD

D is just to the left of the 5 kip load, so that load is not on segment AD. \(N_D = 0\).

\[ \sum F_y = 0: \quad 3 - V_D = 0 \]
\[ V_D = 3.00 \ \text{kip} \]
\[ \sum M_D = 0: \quad M_D + 6 - 3(6) = 0 \]
\[ M_D = 12.0 \ \text{kip}\cdot\text{ft} \]
Part C — Internal Forces at E
Step 3Left Segment BE of Member BC

By action and reaction, member AB pushes down on BC with 2 kip at B. Segment BE is 4 ft long and also carries 1.5(4) = 6 kip of distributed load, centred 2 ft from E. \(N_E = 0\).

\[ \sum F_y = 0: \quad -2 - 6 - V_E = 0 \]
\[ V_E = -8.00 \ \text{kip} \]
\[ \sum M_E = 0: \quad M_E + 6(2) + 2(4) = 0 \]
\[ M_E = -20.0 \ \text{kip}\cdot\text{ft} \]
What the minus signs mean: BC behaves as a cantilever loaded downward, so it hogs (top fibres in tension) at E and the shear acts opposite to the assumed direction.
Step 4Summary of Results
QuantityValueMeaning
Ay3.00 kipRoller reaction
By2.00 kipPin force between the members
VD3.00 kipShear at D
MD12.0 kip·ftSagging moment at D
VE−8.00 kipShear at E
ME−20.0 kip·ftHogging moment at E

Final Answers

POINT D
ND = 0   VD = 3.00 kip   MD = 12.0 kip·ft
POINT E
NE = 0   VE = −8.00 kip   ME = −20.0 kip·ft

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top