Hibbeler Statics 14th Edition Problem 7-12 Solution: Bearing Spacing for Zero Moment at the Shaft Centre

Internal Forces in Shafts

Bearing Spacing a for Zero Moment at the Centre of a Symmetric Shaft

A shaft of length L rests on two bearings placed symmetrically, a distance a apart. The distributed load has constant intensity w between the bearings and tapers linearly to zero at each end of the shaft. Find the bearing spacing a, in terms of L, for which the bending moment at the centre of the shaft is zero.

What We Know

  • Shaft length L, bearings a apart and centred
  • Uniform load w over the length a between the bearings
  • Triangular load on each overhang of length (L − a)/2, from w at the bearing to zero at the end
  • Condition: bending moment at mid-length is zero
  • Find: a in terms of L
Method of sections: Symmetry gives the bearing reactions directly. Cut the shaft at its centre, write the moment of everything on the left half about the cut, and set it to zero.
Step 1Total Load and Bearing Reactions
wAyBy(L − a)/2a(L − a)/2

Each triangular end load has resultant \(\tfrac{1}{2}w\cdot\tfrac{L-a}{2} = \tfrac{w(L-a)}{4}\). The total load is therefore

\[ wa + 2\cdot\frac{w(L-a)}{4} = \frac{w(L+a)}{2} \]

By symmetry each bearing carries half:

\[ A_y = B_y = \frac{w(L+a)}{4} \]
Step 2Forces on the Left Half and Their Distances from the Centre

Three forces act on the left half:

\[ \text{Bearing: } \frac{w(L+a)}{4} \ \text{upward, at } \frac{a}{2} \]
\[ \text{Uniform part: } \frac{wa}{2} \ \text{downward, at } \frac{a}{4} \]
\[ \text{Triangular part: } \frac{w(L-a)}{4} \ \text{downward, at } \frac{a}{2} + \frac{L-a}{6} \]

The triangle’s centroid is one-third of its base from its tall side, which is at the bearing.

Step 3Set the Moment at the Centre to Zero
\[ M = \frac{w(L+a)}{4}\cdot\frac{a}{2} - \frac{wa}{2}\cdot\frac{a}{4} - \frac{w(L-a)}{4}\left(\frac{a}{2} + \frac{L-a}{6}\right) = 0 \]

Multiply through by \(24/w\):

\[ 3a(L+a) - 3a^2 - (L-a)(L+2a) = 0 \]
\[ 3aL - \left(L^2 + aL - 2a^2\right) = 0 \]
\[ 2a^2 + 2aL - L^2 = 0 \]
Step 4Solve the Quadratic
\[ a = \frac{-2L + \sqrt{4L^2 + 8L^2}}{4} = \frac{\sqrt{3} - 1}{2}\,L \]
\[ a = 0.366\,L \]
Check: with a = 0.366L, \(2(0.366)^2 + 2(0.366) - 1 = 0.268 + 0.732 - 1 = 0\). The negative root is rejected because a must be positive.
Step 5Summary of Results
QuantityValueMeaning
Ay = Byw(L + a)/4Bearing reactions
Condition2a² + 2aL − L² = 0Zero moment at the centre
a0.366 LRequired bearing spacing

Final Answers

BEARING SPACING
a = 0.366 L

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top