Internal Forces in Frames
Normal Force, Shear & Moment at C in a Cable-Supported Frame, P = 8 kN
A horizontal member 2.25 m long is pinned to a wall at its right end A and carries a vertical load P = 8 kN at its left end. A short post stands on the member 0.75 m from the left end and carries a pulley of radius 0.1 m, whose centre is 0.5 m above the member. A cable runs from the left end of the member, over the pulley, and then horizontally to the wall at B. Point C is on the member 0.75 m from A. Find the internal normal force, shear force and moment at C.
What We Know
- Load P = 8 kN downward at the left end, 2.25 m from A
- Horizontal cable leaves the top of the pulley 0.5 + 0.1 = 0.6 m above the member
- Pin support at A, cable anchored at B
- C is 0.75 m to the left of A
- Find: N, V and M at C
Method of sections: Treat the member, post, pulley and the sloping part of the cable as one free body, so the only cable force on it is the tension T in the horizontal run. Then cut at C and keep the short piece CA.
Part A — Cable Tension and Pin Reactions
Step 1Moments About A
P acts 2.25 m from A and the horizontal cable force T acts 0.6 m above A.
\[ \sum M_A = 0: \quad 8(2.25) - T(0.6) = 0 \]
\[ T = 30.0 \ \text{kN} \]
Step 2Force Balance
The cable pulls the frame towards the wall, so the pin pushes back horizontally; vertically the pin carries P.
\[ \sum F_x = 0: \quad A_x = 30.0 \ \text{kN} \ (\leftarrow) \]
\[ \sum F_y = 0: \quad A_y = 8.00 \ \text{kN} \ (\uparrow) \]
Part B — Internal Forces at C
Step 3Right Segment CA
Segment CA is 0.75 m long and carries only the pin reactions. On its left face, positive N points away from the segment (to the left), positive V is upward and positive M is clockwise.
\[ \sum F_x = 0: \quad -N_C - 30 = 0 \]
\[ N_C = -30.0 \ \text{kN} \]
\[ \sum F_y = 0: \quad V_C + 8 = 0 \]
\[ V_C = -8.00 \ \text{kN} \]
\[ \sum M_C = 0: \quad -M_C + 8(0.75) = 0 \]
\[ M_C = 6.00 \ \text{kN}\cdot\text{m} \]
What the signs mean: the member is in 30 kN compression between the post and the wall, and the shear acts opposite to the assumed direction.
Step 4Summary of Results
| Quantity | Value | Meaning |
|---|---|---|
| T | 30.0 kN | Cable tension |
| Ax, Ay | 30.0 kN, 8.00 kN | Pin reactions |
| NC | −30.0 kN | Compression |
| VC | −8.00 kN | Shear at C |
| MC | 6.00 kN·m | Moment at C |
Final Answers
POINT C
NC = −30.0 kN VC = −8.00 kN MC = 6.00 kN·m