Shear Force & Bending Moment at Points C and D of a Beam
A horizontal beam AE is 22 ft long. It is supported at A, which provides only a vertical reaction, and at B, 14 ft from A, which can provide both vertical and horizontal reactions.
Three downward loads act on it: 500 lb at 6 ft from A, 200 lb directly over B, and 300 lb at the free end E.
Point C is 10 ft from A, and point D is 2 ft to the left of E.
Find the internal shear force and bending moment at C and at D.
What We Know
Loads: 500 lb at 6 ft from A, 200 lb at B, 300 lb at E (all downward)
Supports: A (vertical reaction only) and B (14 ft from A)
Point C: 10 ft from A, between the 500 lb load and B
Point D: 20 ft from A, on the overhang, 2 ft from E
Find: shear force V and bending moment M at C and at D
Method of sections. First find the support reactions from the whole beam. Then cut the beam at the point of interest, keep the simpler side, and apply equilibrium to that piece. Sign convention used here: on the right-hand face of a left segment, positive shear acts downward and positive moment is counterclockwise (sagging positive).
Part A — Support Reactions
Step 1Free-Body Diagram of the Whole Beam
Replace the supports with their reactions: \(A_y\) at A, and \(B_x\), \(B_y\) at B.
No horizontal load acts on the beam, so \(\sum F_x = 0\) gives \(B_x = 0\).
Step 2Moments About B to Find Ay
Summing moments about B removes \(B_y\) and the 200 lb load from the equation. The 500 lb load is 8 ft to the left of B and the 300 lb load is 8 ft to the right. Taking counterclockwise as positive:
Segment AC is 10 ft long and carries \(A_y\) at its left end and the 500 lb load 4 ft to the left of C. The internal forces \(N_C\), \(V_C\) and \(M_C\) are drawn in their positive directions on the cut face.
There is no horizontal force on the segment, so \(N_C = 0\).
What the minus sign means: the shear at C acts opposite to the assumed direction, i.e. upward on the right-hand face of segment AC, with a magnitude of 386 lb.
Step 6Bending Moment at C
Summing moments about the cut at C removes \(V_C\). Counterclockwise positive:
What the minus sign means: the moment at C acts opposite to the assumed sense. The beam is hogging at C (top fibres in tension), with a magnitude of 857 lb·ft.
Part C — Internal Forces at D
Step 7Cut at D and Keep the Right Segment DE
The right-hand piece is the simpler one: it is 2 ft long and carries only the 300 lb load at E. On the left-hand face of a right segment, positive shear acts upward and positive moment is clockwise.
Again there is no horizontal force, so \(N_D = 0\).
Step 8Shear Force at D
\[ \sum F_y = 0: \quad V_D - 300 = 0 \]
\[ V_D = 300 \ \text{lb} \]
Step 9Bending Moment at D
Summing moments about the cut at D, the 300 lb load acts 2 ft away:
\[ \sum M_D = 0: \quad -M_D - 300(2) = 0 \]
\[ M_D = -600 \ \text{lb}\cdot\text{ft} \]
Cross-check from the left side: using everything to the left of D instead,
\(V_D = 114.3 - 500 - 200 + 885.7 = 300\) lb and
\(M_D = 114.3(20) - 500(14) - 200(6) + 885.7(6) = -600\) lb·ft. Both sides agree.