Hibbeler Statics 14th Edition Problem 7-17 Solution: Internal Forces in a Cantilevered Rack Arm

Internal Forces in Frames

Normal Force, Shear & Moment at the Fixed Support of a Cantilevered Rack Arm

A smooth pipe weighing 300 lb in total is carried at each end by a cantilevered rack. Each rack has a vertical post and an arm that slopes upward at 30° from the horizontal; the arm is fixed to the post at A. The pipe has a 6 in. radius and rests in the corner, touching both the post and the arm (at B). Find the normal force, shear force and moment acting in one arm at its fixed support A, on a vertical section.

What We Know

  • Total pipe weight 300 lb, shared by two racks: 150 lb on each
  • Arm inclined 30° above the horizontal, fixed at A
  • Smooth pipe, radius 6 in., touching the vertical post and the arm
  • Smooth contact means each contact force is perpendicular to the surface
  • Find: N, V and M on a vertical section through A
Method of sections: First balance the pipe to get the contact force on the arm. Then treat the arm as a free body cut by a vertical section at A, where N is horizontal and V is vertical.
Part A — Contact Force on the Arm
Step 1Equilibrium of the Pipe

Three forces act on the pipe at one rack: 150 lb of weight, a horizontal force from the post, and the arm’s force \(N_B\), which is perpendicular to the arm and therefore 30° from the vertical. Vertically:

\[ \sum F_y = 0: \quad N_B\cos 30^\circ - 150 = 0 \]
\[ N_B = 173.2 \ \text{lb} \]
Step 2Where the Pipe Touches the Arm

The post and the arm meet at 60°, and the pipe’s centre lies on the bisector of that corner, 30° from each surface. The contact point B is therefore at a distance along the arm of

\[ AB = \frac{6}{\tan 30^\circ} = 10.39 \ \text{in.} \]
Part B — Internal Forces at A
Step 3Normal and Shear Force

The pipe pushes on the arm with 173.2 lb, perpendicular to the arm: downward and away from the post. Its components are 173.2 sin 30° horizontally and 173.2 cos 30° vertically.

\[ \sum F_x = 0: \quad N_A - 173.2\sin 30^\circ = 0 \]
\[ N_A = 86.6 \ \text{lb} \]
\[ \sum F_y = 0: \quad V_A - 173.2\cos 30^\circ = 0 \]
\[ V_A = 150 \ \text{lb} \]
Step 4Moment at A

\(N_B\) is perpendicular to the arm, so its moment arm about A is the full distance AB:

\[ \sum M_A = 0: \quad M_A - 173.2(10.39) = 0 \]
\[ M_A = 1800 \ \text{lb}\cdot\text{in.} = 1.80 \ \text{kip}\cdot\text{in.} \]
Reading the result: the arm is in 86.6 lb tension at A, the shear equals the 150 lb share of the pipe weight, and the moment is the same as 150 lb acting at a horizontal distance of 12 in. from A minus the effect of the horizontal component, which works out to 1800 lb·in.
Step 5Summary of Results
QuantityValueMeaning
NB173.2 lbPipe force on the arm
AB10.39 in.Contact point distance along the arm
NA86.6 lbTension at A
VA150 lbShear at A
MA1.80 kip·in.Moment at A

Final Answers

FIXED SUPPORT A
NA = 86.6 lb   VA = 150 lb   MA = 1.80 kip·in.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top