Internal Forces in Frames
Largest Load P and Internal Forces at C When the Cable Limit is 2 kN
The frame is the same as in Problem 7-9: a 2.25 m horizontal member pinned to the wall at A, a vertical load P at its left end, and a cable that runs from the left end over a pulley (top of the pulley 0.6 m above the member) and horizontally to the wall at B. The cable fails when its tension reaches 2 kN. Find the largest load P the frame can carry, and for that load the internal normal force, shear force and moment at C, 0.75 m from A.
What We Know
- Maximum cable tension T = 2 kN
- P acts 2.25 m from A; the horizontal cable is 0.5 + 0.1 = 0.6 m above the member
- C is 0.75 m to the left of A
- Find: largest P, then N, V and M at C
Method of sections: Set the cable tension to its limit and use the whole-frame moment equation to get P. Then cut at C and keep piece CA, exactly as in Problem 7-9.
Part A — Largest Load P
Step 1Moments About A at the Cable Limit
\[ \sum M_A = 0: \quad P(2.25) - 2(0.6) = 0 \]
\[ P = 0.533 \ \text{kN} \]
Step 2Pin Reactions
\[ \sum F_x = 0: \quad A_x = 2.00 \ \text{kN} \ (\leftarrow) \]
\[ \sum F_y = 0: \quad A_y = 0.533 \ \text{kN} \ (\uparrow) \]
Part B — Internal Forces at C
Step 3Right Segment CA
On the left face of segment CA, positive N points away from the segment, positive V is upward and positive M is clockwise.
\[ \sum F_x = 0: \quad -N_C - 2 = 0 \]
\[ N_C = -2.00 \ \text{kN} \]
\[ \sum F_y = 0: \quad V_C + 0.533 = 0 \]
\[ V_C = -0.533 \ \text{kN} \]
\[ \sum M_C = 0: \quad -M_C + 0.533(0.75) = 0 \]
\[ M_C = 0.400 \ \text{kN}\cdot\text{m} \]
Scaling check: every result is 1/15 of the Problem 7-9 value, because the cable tension here (2 kN) is 1/15 of the 30 kN found there.
Step 4Summary of Results
| Quantity | Value | Meaning |
|---|---|---|
| P | 0.533 kN | Largest load |
| NC | −2.00 kN | Compression |
| VC | −0.533 kN | Shear at C |
| MC | 0.400 kN·m | Moment at C |
Final Answers
LARGEST LOAD
P = 0.533 kNPOINT C
NC = −2.00 kN VC = −0.533 kN MC = 0.400 kN·m