Hibbeler Statics 14th Edition Problem 7-9 Solution: Internal Forces at C in a Cable-Supported Frame (P = 8 kN)

Internal Forces in Frames

Normal Force, Shear & Moment at C in a Cable-Supported Frame, P = 8 kN

A horizontal member 2.25 m long is pinned to a wall at its right end A and carries a vertical load P = 8 kN at its left end. A short post stands on the member 0.75 m from the left end and carries a pulley of radius 0.1 m, whose centre is 0.5 m above the member. A cable runs from the left end of the member, over the pulley, and then horizontally to the wall at B. Point C is on the member 0.75 m from A. Find the internal normal force, shear force and moment at C.

What We Know

  • Load P = 8 kN downward at the left end, 2.25 m from A
  • Horizontal cable leaves the top of the pulley 0.5 + 0.1 = 0.6 m above the member
  • Pin support at A, cable anchored at B
  • C is 0.75 m to the left of A
  • Find: N, V and M at C
Method of sections: Treat the member, post, pulley and the sloping part of the cable as one free body, so the only cable force on it is the tension T in the horizontal run. Then cut at C and keep the short piece CA.
Part A — Cable Tension and Pin Reactions
Step 1Moments About A

P acts 2.25 m from A and the horizontal cable force T acts 0.6 m above A.

\[ \sum M_A = 0: \quad 8(2.25) - T(0.6) = 0 \]
\[ T = 30.0 \ \text{kN} \]
Step 2Force Balance

The cable pulls the frame towards the wall, so the pin pushes back horizontally; vertically the pin carries P.

\[ \sum F_x = 0: \quad A_x = 30.0 \ \text{kN} \ (\leftarrow) \]
\[ \sum F_y = 0: \quad A_y = 8.00 \ \text{kN} \ (\uparrow) \]
Part B — Internal Forces at C
Step 3Right Segment CA

Segment CA is 0.75 m long and carries only the pin reactions. On its left face, positive N points away from the segment (to the left), positive V is upward and positive M is clockwise.

\[ \sum F_x = 0: \quad -N_C - 30 = 0 \]
\[ N_C = -30.0 \ \text{kN} \]
\[ \sum F_y = 0: \quad V_C + 8 = 0 \]
\[ V_C = -8.00 \ \text{kN} \]
\[ \sum M_C = 0: \quad -M_C + 8(0.75) = 0 \]
\[ M_C = 6.00 \ \text{kN}\cdot\text{m} \]
What the signs mean: the member is in 30 kN compression between the post and the wall, and the shear acts opposite to the assumed direction.
Step 4Summary of Results
QuantityValueMeaning
T30.0 kNCable tension
Ax, Ay30.0 kN, 8.00 kNPin reactions
NC−30.0 kNCompression
VC−8.00 kNShear at C
MC6.00 kN·mMoment at C

Final Answers

POINT C
NC = −30.0 kN   VC = −8.00 kN   MC = 6.00 kN·m

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top